Factors affecting data transmission between fedar heat transfer printer and computer

September 16, 2020

What are factors that affect data transmission between fedar heat transfer printer and computer? How can data transfer be faster, so that fedar heat transfer printer can work better? The specific method is as follows:


1.Computer configuration is not high or computer operating system responds slowly, RIP software data cache space of fedar heat transfer printer is small,computer operating system is infected with malicious code viruses, etc., which cause data transmission to be interrupted or slow;


To solve this problem, you can try to change computer online test printing; check computer operating system for virus; reinstall related RIP software, and set enough data buffer space for RIP software in fedar heat transfer printer.


2.The problem of data line between fedar heat transfer printer and computer connection.


For USB interface heat transfer printer, USB data line is too long or the quality is poor, will affect data transmission.


For network interface heat transfer printer, please check online network cable, whether the crystal head of network cable is in good contact, and whether sorting order is correct. Often network cable is not correctly sorted and crystal head is not properly carded, which will affect data transmission.


Therefore, when user connects fedar heat transfer printer to computer, please use  good quality USB data cable or a shielded network cable.


3.The driver related to fedar heat transfer printer must be installed correctly.


USB interface heat transfer printer must install driver for USB;


Network interface heat transfer printer is online, and IP settings must be set according to online installation instructions provided by manufacturer.


4.Please use integrated network card or external PCI network card for network online fedar heat transfer printer. Please do not use USB external network card, because the USB external network card will experience data transmission stalls when fedar heat transfer printer is online and print slowly. , There is a stall failure on both sides.

Data Transmission between Fedar Heat Transfer Printer and Computer